#Migrating to abode iota full
#Migrating to abode iota android
#Migrating to abode iota Offline

In the Devices tab of the Abode App, find and select your Iota camera.

You can adjust the streaming quality following these steps: If the bandwidth available at your location does not allow for sufficient speeds, the video stream may take longer to start. The default setting for your Iota camera is Medium - this provides a quality stream to Abode App. To achieve the optimal performance of your Iota streaming video camera, you may need to adjust the settings to suit your local environment. To start creating automations, tap 'CUE' at the bottom of the Abode App, then tap the '+' at the top right of the Automations tab of the Abode App.

Under the 'Motion Sensor Sensitivity' section adjust the sensitivity to your desired level.Ī comprehensive CUE Automations guide can be found here.

Tap the 'iota Motion' device (or whatever you may have renamed it to).

#Migrating to abode iota android

In the Abode App on your iOS or Android device, select the Devices option from the bottom menu.

Enable 'Mute All Sounds' at the top as a quick way to disable all hub sounds.

Your hub sound settings can be managed here.

In the Abode App on your iOS or Android device, select the Menu (≡).

Select the Wi-Fi network you would like to move your hub to, enter the Wi-Fi passcode, then tap 'Connect' to finalize.Ī comprehensive guide detailing adding a plan to your system can be found here.

Follow the in-app prompts to pair the device to your hub.

Select the proper category, then tap the device you would like to add.

In the Abode App on your iOS or Android device, select the Menu (≡). Entry Delay is defaulted to one minute but adjustable in the Abode App under Menu (≡) > System Settings > Time Delay.ġ. If the system is not disarmed before the entry delay ends, then the alarm system will be triggered and the siren will sound.

Entry Delay – When the system is armed, you can enter the home and the system starts the entry delay timer to give you time to disarm the system.

Exit delay is defaulted to one minute but adjustable from the Abode App under Menu (≡) > System Settings > Time Delay.

Exit Delay – While in the home, you can arm the system and the exit delay gives you time to leave the home before the system arms.

What is entry and exit delay for? The delay timers are designed for when you want to arm the system before leaving home, and disarm the system after entering the home. At the top, select the system mode you would like to place the system into. To arm your system make sure you are on the Dashboard tab of your Abode App (from the bottom tray).

Standby Mode turns off the intrusion protection: door/window sensors and interior motion but leaves other sensors such as flood/water sensors and CO sensors enabled.

Home Mode turns on the perimeter protection: door/windows sensors and turns off interior motion.

Away Mode turns on the perimeter protection: door/window sensors and interior motion.

Usage Guide Arm/disarm the systemĪbode has 3 alarm modes: Away, Home, and Standby Review our Iota LED Status Light Guide here for a detailed breakdown of Iota status light behavior.

#Migrating to abode iota Offline

The Iota does not currently support offline storage with an SD card Parts Overviewįield of View: 152° diagonal 127° horizontal 67° verticalĪlarm in Memory- Red/White Fade (To reset - Arm then Disarm)

#Migrating to abode iota full

Read the full Mini Door/Window Sensor Guide here. The devices (Mini Door/Window Sensor & Key Fob) that are included in the Iota Kit have already been paired with the hub.